How to fix the dents in your aluminum garage door
Garage Door Repair Dunwoody GA
A good aluminum garage door offers many benefits. For one, aluminum garage doors do not require much maintenance or weather proofing. And they can usually be easily repaired should anything happen to your garage door, like a surface dent.
Surface dents are important to consider for those with a car or a teenager who just got his or her licence. In the blink of an eye, an accident could occur that dents your garage door.
Why Garage Door Repair Matters
The simplest thing you can do is live with it. But you may not be aware of the possible issues that come along with this decision. One problem that you might face is an overstressed spring system that might fail prematurely given enough time. The reason this might happen is because the dent (depending on how large it is) might throw the whole door out of balance.
The garage door’s spring system relies on a precise natural balance, which is now gone. Another thing that you should know is that an unbalanced door could start making noises. These noises will only get stronger.
You may not be aware of it, but your overall curb appeal does depend, to a certain degree, on the condition of your garage door. Leaving your garage door as is could devalue your home a bit. This can hurt you in the long run, especially if you want to sell your home.
Remember that a damaged garage door will seem weak to a potential burglar, putting your home in danger.
Tips to Fix a Minor Garage Door Dent
You know how unsightly a dented garage door can seem to you and your neighbors, making repairing it that much more pressing.
Well, remember that there are two types of dents: small dents and large dents. A large dent will have to be taken care of professionally by your garage door specialist or maybe replaced. But you may be able to do something about smaller dents.
The first thing that you need to do is gather all the materials needed to repair the dent, which are the following:
- Dish soap
- A clean rag
- A sponge
- Aluminum foil
- A heating source like a hair dryer or a lighter
- A can of pressurized air
- heavy-duty tape
The first thing you want to do is clean the area as thoroughly as possible. Try to remove any debris or paint that might be stuck on the dent. Make sure that you let the area dry off completely before proceeding. This drying step can be done with the air, or you can just use the rag that you have.
The next you want to do is cut enough aluminum foil to cover the dent completely. Use your tape to secure the aluminum foil in place, and try to keep the foil as flat as possible. Grab your heat source, and carefully heat the aluminum foil, which should not take longer than a few minutes. Do not touch the foil with your bare hands, instead use gloves to take the foil off the dent.
You want to spray the pressurized air directly over the dent as soon as you remove the foil. The dent should simply pop out as soon as you do this.
The reason this works is because heat makes aluminum a little pliable. And the air forces the aluminum to expand due to the extreme temperature change.
As you can see, taking care of a minor dent is not too hard, and it is not expensive. Be sure to talk to your garage door repair specialist if this solution does not work, as your problem might need a professional’s touch.
For any and all garage door issues, we’ve got you covered. We’re All Four Seasons Garage Door Repair Dunwoody GA- Call us at (770) 517-7078 or click on us today: All Four Seasons Garage Door Repair Dunwoody GA